AD813AR-14-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Current Feedback |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD813 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 18V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.2V |
| Number of Channels | 3 |
| Operating Supply Current | 4.5mA |
| Power Dissipation | 1W |
| Quiescent Current | 5.5mA |
| Supply Current-Max | 20.1mA |
| Slew Rate | 250V/μs |
| Common Mode Rejection Ratio | 62 dB |
| Voltage - Supply, Single/Dual (±) | 2.4V~36V ±1.2V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 100000 kHz |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| -3db Bandwidth | 100MHz |
| Input Capacitance | 1.7pF |
| Input Bias Current | 500nA |
| Consumer IC Type | VIDEO AMPLIFIER |
| Input Voltage Noise Density | 3.5nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD813AR-14-REEL7 Overview
In the form of a Tape & Reel (TR), class d amplifier is packaged.14-SOIC (0.154, 3.90mm Width) package reduces space by providing access to class d amp.This amplifier lends itself well to Current Feedback because of its high performance.Mounting audio power amplifier on the PCB is done using the Surface Mount method.The base part number is AD813 and is used to audio amp.A pin count of 14 can be found on audio digital amplifier.14 terminations make up digital amplifiers structure.Its -3db bandwidth is 100MHz.Audio amplifier is powered by a 4.5mA supply current.14 pins are used to construct amplifier ic.Temperatures should be below 85°C.Ideally, the operating temperature should be -40°C.At the present time, there are 3 channels available.Its consumer IC type is VIDEO AMPLIFIER.If the supply voltage (Vsup) is above 1.2V, normal operation can be achieved.18V refers to the maximum supply voltage (Vsup).The audio amplifier ic gains a voltage of 70dB.In addition, it consumes 5.5mA quiescent current and is not affected by external factors.
AD813AR-14-REEL7 Features
14 pins
3 channels
AD813AR-14-REEL7 Applications
There are a lot of Analog Devices Inc. AD813AR-14-REEL7 Video Amps and Modules applications.
- Aftermarket telematics
- Analog and Digital Mixing Consoles
- High-End A/V Receivers
- Premium Audio
- High-Fidelity (HiFi) Headphone Drivers
- Microphone Preamplifier Circuit
- General-Purpose Amplifier Applications
- Broadcast Studio Equipment
- Professional Audio Equipment
- Telematics control unit
