AD8145YCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Receiver |
| Subcategory | Comparator |
| Voltage - Supply | 4.5V~24V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8145 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Nominal Supply Current | 48.5mA |
| Output Current | 50mA |
| Response Time | 6 ns |
| Slew Rate | 2100 V/μs |
| Data Rate | 500 Mbps |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.9μA |
| Protocol | Ethernet |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 425MHz |
| Max Frequency | 500MHz |
| Number of Drivers/Receivers | 0/3 |
| Min Dual Supply Voltage | 2.25V |
| Receiver Hysteresis | 18mV |
| Max Supply Voltage (DC) | 11V |
| Min Supply Voltage (DC) | 4.5V |
| Number of Amplifiers | 6 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8145YCPZ-R2 Overview
Driver ICs with enhanced 32-VFQFN Exposed Pad, CSP packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package houses this receiver.As a Receiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 4.5V~24V.The field can have up to 0/3 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~105°C is the operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.ICs that are packaged with market standard pinouts are available on the market.Since the base part number AD8145 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control driver IC featuring 32 pins.It is possible to subcategoriComparatore this rf transceiver module as Comparator.This optical transceiver consists of a total of 3 channels embedded in it.In this bluetooth transceiver, a 50mA output current is provided as an output.With this integrator circuit you will be able to supply it with dual voltages up to 5.5V.If this can transceiver has a dual supply voltage, you should select a power supply that is suitable for 2.25V outputs.
AD8145YCPZ-R2 Features
Tape & Reel (TR) package
32 pin count
32 pins
3 channels
AD8145YCPZ-R2 Applications
There are a lot of Analog Devices Inc. AD8145YCPZ-R2 Drivers/Receivers/Transceivers applications.
- Copper connection network
- Televisions
- Remote controls
- Car radio
- Satellite communication
- 1x/2x Fiber Channel
- TV signal transmission
- Switching system
- Telecom applications
- Metro access rings
