Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Copper, Silver, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
256-LBGA Exposed Pad |
Number of Pins |
256 |
Operating Temperature |
0°C~85°C |
Packaging |
Tray |
Series |
XStream™ |
JESD-609 Code |
e1 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
256 |
Type |
Crosspoint Switch |
Terminal Finish |
Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
Voltage - Supply |
2.25V~3.63V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
8152 |
Pin Count |
256 |
Operating Supply Voltage |
3.3V |
Circuit |
1 x 34:34 |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.25V |
Number of Channels |
34 |
Operating Supply Current |
800mA |
Nominal Supply Current |
800mA |
Power Dissipation |
60mW |
Data Rate |
3.2 Gbps |
Supply Type |
Single |
On-State Resistance (Max) |
57Ohm |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
900μm |
Length |
27mm |
Width |
27mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8152JBPZ Overview
Digital switch is provided in the 256-LBGA Exposed Pad for the purpose of saving board space.The package is packaged in accordance with Tray.Digital switch ic uses a Surface Mount mounting method.Crosspoint Switch is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.25V~3.63V.provides digital controlled switch's digital controlled switch'sMultiplexers in the XStream? series are suitable for a wide range of applications.Among its basic features are 256 terminations.The base part number is 8152, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 2.5V voltage.A component pin count of 256 can be found on this turn signal switch.As a result, BALL represents the end of the conductors.In this case, Single is employed as the supply type.A total of 256 pins are configured on this board.This unit is mounted in the way of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 2.25V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.Reliable performance of the multiplexers can be achieved when a supply voltage of 3.3V is provided.The turn signal switch's circuit consists of 34 channels that are being used for transmission in the circuit.In a load with a supply voltage of 800mA, stability of the multiplexers can be maintained.
AD8152JBPZ Features
Supplied in the 256-LBGA Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
Operating with the supply current of 800mA
AD8152JBPZ Applications
There are a lot of Analog Devices Inc. AD8152JBPZ Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Encrypted communications system
- High-performance memory systems
- Combinational circuit
- Electronically controlled engine system
- Control unit of Central Processing unit (CPU)
- Logic gates for other digital devices
- Robotic vehicles
- Steel plants
- Paper plants