AD8209WBRMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 440kOhm |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8209 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.6mA |
| Slew Rate | 1V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 20V |
| Gain Bandwidth Product | 80kHz |
| Unity Gain BW-Nom | 80 kHz |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Voltage - Input Offset | 2mV |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8209WBRMZ-R7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Differential-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. The input offset voltage is 20V. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.6mA . A instrumentation amplifier like this has 1 circuits. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As the name implies, Automotive, AEC-Q100 refers to the series of the buffer op amp. It is recommended to keep the buffer amps resistance within the range of 440kOhm.
AD8209WBRMZ-R7 Features
8 Pins
supply voltage of 5V
Resistance of 440kOhm
AD8209WBRMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8209WBRMZ-R7 Instrumentational OP Amps applications.
- Oscilloscopes
- Radiation thermometry transducers
- Ultrasound transducers
- Proportional counter tubes
- Medical instruments
- Semiconductor detectors
- Signal operation
- Automatic control
- Information processing
- Broadcasting
