AD820ARZ-REEL
| Parameters | |
|---|---|
| Settling Time | 4.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| -3db Bandwidth | 1.9MHz |
| Bias Current-Max (IIB) @25C | 0.000025μA |
| Programmable Power | NO |
| Input Capacitance | 2.8pF |
| Wideband | NO |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD820 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 900μA |
| Power Dissipation | 1W |
| Quiescent Current | 900μA |
| Supply Current-Max | 0.9mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1900 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
AD820ARZ-REEL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. J-FET-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 1mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 900μA. There should be no change in the voltage gain at 120dB. There are a total of 1 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TAPE AND REEL. 900μA quiescent currents are flowing through buffer op amp.
AD820ARZ-REEL Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD820ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD820ARZ-REEL Instrumentational OP Amps applications.
- Automatic control
- Wireless base stations
- Inverse/same-phase proportional circuit
- Mobile phone
- Portable docking station
- Navigation
- Car stereo
- Cinema or auditorium audio system
- Test and measurement instruments
- High gain DC amplifier
