AD820BRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD820 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 900μA |
| Power Dissipation | 1W |
| Quiescent Current | 900μA |
| Supply Current-Max | 0.9mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.9MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1800 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0025μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Settling Time | 4.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 2.8pF |
| Wideband | NO |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD820BRZ-REEL7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called J-FET-types. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Using a supply current of 900μA , this buffer op amp will be able to operate. Keeping the voltage gain at 120dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier is packaged by using a TAPE AND REEL axis. The quiescent current is 900μA.
AD820BRZ-REEL7 Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD820BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD820BRZ-REEL7 Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Car stereo
- Video conversion and routing
- Comparator
- Signal filtering
- Multimedia playback equipment
- Communication device
- Portable media players
- Fission chambers
- Industrial control system
