AD8210WYRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8210 |
| Function | Current Monitor |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1.5mA |
| Voltage - Input | -2V~65V |
| Nominal Supply Current | 2mA |
| Current - Output | 5mA |
| Accuracy | ±0.7% |
| Slew Rate | 3 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 450 kHz |
| Gain Bandwidth Product | 450 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Sensing Method | High/Low-Side |
| Number of Amplifiers | 2 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8210WYRZ Overview
Included in package Tube is this file.The package is in the form of 8-SOIC (0.154, 3.90mm Width).Surface Mount mounts this current regulator.Temperatures should not exceed -40°C~125°C during operation.There is a support for voltages of -2V~65V as input voltages for this voltage regulator.As part of the AD8210 family, current regulator belongs to this class.As part of a signal interface in a computer or other communication constant current regulator, 8 pins are pronged contacts.It is mounted by Surface Mount on this current regulator.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.The output current of 5mA makes it a very flexible power converter when it comes to design.Strong/weak growth of channels: 1.A maximum supply voltage of 5.5V can be supported by it.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.In order to operate, it must be powered by a minimum voltage of 4.5V.It is a type of FPGA belonging to the Automotive series.It has an Amplifier type of OPERATIONAL AMPLIFIER.The operating supply current supplied for its operation reaches 1.5mA.For high efficiency, keep the supply voltage at 5V.A current regulation has 26.02dB voltage gains, which are simply a function of the input and output voltage between them.
AD8210WYRZ Features
Tube package
AD8210 family
The maximal supply voltage of 5.5V
Automotive series
AD8210WYRZ Applications
There are a lot of Analog Devices Inc. AD8210WYRZ Current Regulation/Managements applications.
- Power management
- Diesel injection controls
- Suspension controls
- Battery chargers
- Programmable current source
- Engine management
- Industrial applications current measurement
- Over-current measurement
- Smart battery packs
- Vehicle dynamic controls
