Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8210 |
Function |
Current Monitor |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
1.5mA |
Voltage - Input |
-2V~65V |
Current - Output |
5mA |
Accuracy |
±0.7% |
Slew Rate |
3 V/μs |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
100 dB |
Input Offset Voltage (Vos) |
1mV |
Gain Bandwidth Product |
500 kHz |
Voltage Gain |
26.02dB |
Power Supply Rejection Ratio (PSRR) |
65dB |
Sensing Method |
High/Low-Side |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8210WYRZ-R7 Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.A package in the way of 8-SOIC (0.154, 3.90mm Width) is used for voltage regulator.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -2V~65V for the input.8 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.In the AD8210 family, current regulator is a member.Computers or other communication constant current regulators have 8 pins, which are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.In order to make this constant current work, it needs to be powered by 5VV.The output current of 5mA makes it a very flexible power converter when it comes to design.Compared to the last few years, the number of channels has grown strong/weak: 1.A maximum supply voltage of 5.5V can be supported by it.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.With the minimal supply voltage of 4.5V, it is capable of operating.It is of this type that the Automotive series FPGAs are.Amplifier type OPERATIONAL AMPLIFIER can be found on this electrical buck boost converter.As soon as 1.5mA reaches the operating supply current, the boost converter begins to operate.Essentially, current regulation is made up of 2 elements.For high efficiency, keep the supply voltage at 5V.26.02dB voltage gains represent the simple ratio of an output voltage to its input voltage.
AD8210WYRZ-R7 Features
Tape & Reel (TR) package
AD8210 family
The maximal supply voltage of 5.5V
Automotive series
2 elements
AD8210WYRZ-R7 Applications
There are a lot of Analog Devices Inc. AD8210WYRZ-R7 Current Regulation/Managements applications.
- Transmission controls
- DC motor control
- Motor controls
- Over current monitor
- Over-current protection
- DC-to-dc converters
- Over-current measurement
- Automotive current measurement
- Diesel injection controls
- Power management