AD8213YRMZ
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 5MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8213 |
| Function | Current Monitor |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2.5mA |
| Voltage - Input | -2V~65V |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 3.7mA |
| Accuracy | ±0.25% |
| Slew Rate | 4.5 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 12μV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 500 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 2.5mA |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
AD8213YRMZ Overview
Buck boost converter is embedded in the Tube package.10-TFSOP, 10-MSOP (0.118, 3.00mm Width) has packaged voltage regulator in this manner.Surface Mount mounts this current regulator.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -2V~65V as an input voltage.In the case of 10 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.Current regulator belongs to AD8213 family.As part of a signal interface in a computer or other communication constant current regulator, 10 pins are pronged contacts.Surface Mount is responsible for mounting this current regulator.It supports the maximal supply voltage of 5.5V.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.The buck boost converter operates with a minimum supply voltage of 4.5V.This electrical buck boost converter is an amplifier of type OPERATIONAL AMPLIFIER.It reaches 2.5mA when the operating supply current is supplied.Essentially, current regulation is made up of 2 elements.Maintaining 5V as the supply voltage is essential for high efficiency.With its maximum supply current, 3.7mA offers maximum current regulator's design flexibility due to its maximal supply current.Current regulations have 26.02dB voltage gains, which are the ratio of output voltage to input voltage.It is important to note that the resistance of this electrical dc to dc converter is 5MOhm (Ω).
AD8213YRMZ Features
Tube package
AD8213 family
The maximal supply voltage of 5.5V
2 elements
AD8213YRMZ Applications
There are a lot of Analog Devices Inc. AD8213YRMZ Current Regulation/Managements applications.
- DC-to-dc converters
- Suspension controls
- Battery management
- Vehicle dynamic controls
- Over current monitor
- Over-current protection
- Diesel injection controls
- Current sensing
- Engine management
- Smart battery packs
