AD8220WARMZ-R7
| Parameters | |
|---|---|
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 800 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Voltage - Input Offset | 250μV |
| -3db Bandwidth | 1.5MHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8220 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 750μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
AD8220WARMZ-R7 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. Buffer amps of this type are called Instrumentation-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 125μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. Voltage gain should remain at 60dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. 1 elements make up the design of this buffer amplifier. Automotive corresponds to linear amplifier's series.
AD8220WARMZ-R7 Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
AD8220WARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8220WARMZ-R7 Instrumentational OP Amps applications.
- Information processing
- Radiation thermometry transducers
- Communication
- Addition operation circuits
- Gaming industry
- Signal operation
- Medical imaging
- Exponential operation circuits
- High speed sample
- Image computer boards
