AD8221BRZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Max Power Dissipation | 200mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8221 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 36V |
| Number of Elements | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 200mW |
| Quiescent Current | 900μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 562 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Voltage - Input Offset | 25μV |
| -3db Bandwidth | 825kHz |
| Input Offset Current-Max (IIO) | 0.0004μA |
| Voltage Gain-Nom | 10 |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8221BRZ-RL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A Instrumentation-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. The buffer op amp includes 8 pins. There is an input offset voltage of 60μV for this buffer op amp. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 1mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 60dB. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 36V voltage. 900μA quiescent currents are flowing through buffer op amp. 100GOhm should be the range of resistance for the instrumentation amplifier.
AD8221BRZ-RL Features
8 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 100GOhm
AD8221BRZ-RL Applications
There are a lot of Analog Devices Inc. AD8221BRZ-RL Instrumentational OP Amps applications.
- Ultrasound transducers
- Displayers for aircraft and air transportation control systems
- Cinema or auditorium audio system
- Voltage regulation circuit
- Portable docking station
- Power transmission
- Measurements of Wheatstone bridge
- E-book readers
- High/low-pass filter circuit
- Vehicle electronics
