Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100GOhm |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AD8222 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
1.1mA |
Slew Rate |
2V/μs |
Amplifier Type |
Instrumentation |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
500pA |
Voltage - Supply, Single/Dual (±) |
4.6V~36V ±2.3V~18V |
Output Current per Channel |
18mA |
Input Offset Voltage (Vos) |
120μV |
Bandwidth |
750 kHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
80dB |
Average Bias Current-Max (IIB) |
0.003μA |
Supply Voltage Limit-Max |
18V |
-3db Bandwidth |
1.2MHz |
Input Offset Current-Max (IIO) |
0.0015μA |
Voltage Gain-Nom |
100 |
Height Seated (Max) |
1mm |
Length |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8222ACPZ-RL Overview
Packaging for the buffer amplifier is in the form of a 16-VQFN Exposed Pad, CSP case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. In total, the buffer amplifier consists of 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 120μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 1.1mA . Voltage gain should remain at 80dB. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 15V. It is recommended to keep the buffer amps resistance within the range of 100GOhm.
AD8222ACPZ-RL Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
AD8222ACPZ-RL Applications
There are a lot of Analog Devices Inc. AD8222ACPZ-RL Instrumentational OP Amps applications.
- Digital cameras
- Video data acquisition
- Signal filtering
- Hand-held batteries
- Broadcasting
- High-frequency data acquisition systems
- Weak signal detection
- Semiconductor detectors
- E-book readers
- PDA