AD8222BCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8222 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 750 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 60μV |
| -3db Bandwidth | 1.2MHz |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Voltage Gain-Nom | 100 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8222BCPZ-RL Overview
Packaged in a 16-VQFN Exposed Pad, CSP case, the buffer op amp is ready to use. Instrumentation-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It has 16 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 120μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . You can run this op amp ic on 1.1mA . It is a member of the 80dB's 80dB family. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 15V. Instrumentation amplifier resistance should remain within the range of 100GOhm.
AD8222BCPZ-RL Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
AD8222BCPZ-RL Applications
There are a lot of Analog Devices Inc. AD8222BCPZ-RL Instrumentational OP Amps applications.
- pH (acidity)
- Signal filtering
- Weighing systems
- Exponential operation circuits
- Home audio systems
- Television
- Automation control systems
- Mobile phone
- Logarithmic operation circuits
- High/low-pass filter circuit
