AD8222HACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8222 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 750 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.003μA |
| Supply Voltage Limit-Max | 18V |
| -3db Bandwidth | 1.2MHz |
| Input Offset Current-Max (IIO) | 0.0015μA |
| Voltage Gain-Nom | 100 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8222HACPZ-RL Overview
The linear amplifier is packaged in a 16-VQFN, CSP case. This is a Instrumentation type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 16 terminations over the past year. The pins on this board total to 16 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 120μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . There should be no change in the voltage gain at 80dB. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 15V. 100GOhm should be the range of resistance for the linear amplifier.
AD8222HACPZ-RL Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
AD8222HACPZ-RL Applications
There are a lot of Analog Devices Inc. AD8222HACPZ-RL Instrumentational OP Amps applications.
- Biopotential
- Mobile phone
- Polarized electrodes
- Addition operation circuits
- High input resistance broadband
- Active probe
- Thermocouples
- Instrumentation
- Fission chambers
- Automation control systems
