AD8222HBCPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8222 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 750 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 60μV |
| -3db Bandwidth | 1.2MHz |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Voltage Gain-Nom | 100 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8222HBCPZ-RL Overview
There is a 16-VQFN, CSP case in which the instrumentation amplifier is packaged. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 16. It consists of a total of 16 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. 16 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 120μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 1.1mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 80dB. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of instrumentation amplifier is rated 15V voltage. It is important that the linear amplifier resistance stays within the range of 100GOhm.
AD8222HBCPZ-RL Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
AD8222HBCPZ-RL Applications
There are a lot of Analog Devices Inc. AD8222HBCPZ-RL Instrumentational OP Amps applications.
- Large motor controllers
- Fission chambers
- Inverse/same-phase proportional circuit
- PDA
- Displayers for aircraft and air transportation control systems
- Test and measurement instruments
- Exponential operation circuits
- Band-pass filter
- Hand-held batteries
- Radar
