AD8222HBCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8222 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Max Supply Current | 2.2mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 60pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 1.2MHz |
| Gain Bandwidth Product | 1.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Supply Voltage Limit-Max | 18V |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Voltage Gain-Nom | 100 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8222HBCPZ-WP Overview
In the package, you will find a 16-VQFN, CSP-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tray case. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are located on this board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 16 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 120μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 1.1mA . There should be no change in the voltage gain. On the buffer amps, there are 2 channels that can be used. Instrumentation amplifier resistance should remain within the range of 100GOhm.
AD8222HBCPZ-WP Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
AD8222HBCPZ-WP Applications
There are a lot of Analog Devices Inc. AD8222HBCPZ-WP Instrumentational OP Amps applications.
- Power control
- Proportional operation circuits
- Exponential operation circuits
- Video data acquisition
- Signal operation
- pH (acidity)
- Information processing
- Hand-held batteries
- Vehicle electronics
- Communication device
