AD8223ARZ
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8223 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 500μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 12nA |
| Voltage - Supply, Single/Dual (±) | 3V~24V ±2V~12V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset | 250μV |
| -3db Bandwidth | 0.2MHz |
| Input Offset Current-Max (IIO) | 0.002μA |
| Voltage Gain-Nom | 10 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
AD8223ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Instrumentation-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 12V battery. It has 8 pins that make up the linear amplifier. Op amp ic rates 25μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 500μA . It is a member of the 60dB's 60dB family. There are 1 channels on the operational amplifiers. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is important to keep the resistance within the 2GOhm range of the linear amplifier.
AD8223ARZ Features
8 Pins
supply voltage of 12V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD8223ARZ Applications
There are a lot of Analog Devices Inc. AD8223ARZ Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- High-frequency data acquisition systems
- Proportional counter tubes
- single/dual op amp sum and difference circuits
- Video computer boards
- Multimedia playback equipment
- Fast A/D and D/A converters
- Computer workstations
- Portable docking station
- Image computer boards
