AD8223ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8223 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 12nA |
| Voltage - Supply, Single/Dual (±) | 3V~24V ±2V~12V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 125 kHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset | 250μV |
| -3db Bandwidth | 200kHz |
| Input Offset Current-Max (IIO) | 0.002μA |
| Voltage Gain-Nom | 10 |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8223ARZ-R7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 12V volts. An 8-pin op amp ic is included in the package. Op amp rates 25μV as input offset voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAn 500μA volt supply current is needed for this linear amplifier to operate. It is a member of the 60dB's 60dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. It is possible to count 1 elements on this buffer amplifier. The op amp resistance should stay within the range of 2GOhm.
AD8223ARZ-R7 Features
8 Pins
supply voltage of 12V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD8223ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8223ARZ-R7 Instrumentational OP Amps applications.
- Proportional operation circuits
- Large motor controllers
- Gaming industry
- Computer workstations
- Tablets
- Precision measurement
- Integrator circuits
- Non-polarized electrodes
- Video conversion and routing
- Fission chambers
