AD8223BRZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2GOhm |
| Max Power Dissipation | 650mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8223 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 650mW |
| Slew Rate | 0.3V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 12nA |
| Voltage - Supply, Single/Dual (±) | 3V~24V ±2V~12V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 125 kHz |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Voltage - Input Offset | 100μV |
| -3db Bandwidth | 200kHz |
| Input Offset Current-Max (IIO) | 0.002μA |
| Voltage Gain-Nom | 10 |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8223BRZ-R7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Instrumentation-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 12V volts. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 25μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 500μA . It is recommended to keep the voltage gain at 60dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 1 elements in this buffer amplifier. 2GOhm is the range in which the op amp resistance should lie.
AD8223BRZ-R7 Features
8 Pins
supply voltage of 12V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD8223BRZ-R7 Applications
There are a lot of Analog Devices Inc. AD8223BRZ-R7 Instrumentational OP Amps applications.
- Exponential operation circuits
- Communication device
- Active probe
- Video amplifiers
- PDA
- Test equipment
- Differentiator circuits
- Laptop
- Automatic control
- Weighing systems
