AD8224ACPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8224 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 750μA |
| Max Supply Current | 900μA |
| Quiescent Current | 750μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Supply Voltage Limit-Max | 18V |
| -3db Bandwidth | 1.5MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Voltage Gain-Nom | 10 |
| Height | 950μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8224ACPZ-WP Overview
The linear amplifier is packaged in a 16-VQFN Exposed Pad, CSP case which makes it easy for the consumer to handle. This is a Instrumentation type op amp. The op amp is delivered to you in a Tray case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. The op amp ic has an array of 16 pins on it. Op amp ic rates 300μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. 60dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There is an 750μA quiescent current running through op amp ic. During testing, the instrumentation amplifier resistance should remain within a range of 10 TΩ.
AD8224ACPZ-WP Features
16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
AD8224ACPZ-WP Applications
There are a lot of Analog Devices Inc. AD8224ACPZ-WP Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Portable electronic products powered by batteries
- Weak signal detection
- Power control
- Switching amplifier
- Biopotential
- Logarithmic operation circuits
- Wireless base stations
- Measurements of Wheatstone bridge
- Industrial applications including automation
