AD8224BCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8224 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 750μA |
| Quiescent Current | 750μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 175μV |
| -3db Bandwidth | 1.5MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 6e-7μA |
| Voltage Gain-Nom | 10 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8224BCPZ-R7 Overview
The linear amplifier is packaged in a 16-VQFN Exposed Pad, CSP case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. An 16-pin op amp ic is included in the package. Op amp rates 300μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 750μA and 10 . The voltage gain should stay at 60dB. On the buffer amps, there are 2 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a result, linear amplifier's quiescent current is 750μA. In order for the op amp resistance to remain within the 10 TΩ range, the op amp should be tested.
AD8224BCPZ-R7 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
AD8224BCPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8224BCPZ-R7 Instrumentational OP Amps applications.
- Video data acquisition
- Television broadcasting equipment
- Band-stop filter
- Inverse/same-phase proportional circuit
- E-book readers
- Switching amplifier
- Multimedia playback equipment
- Industrial control system
- Information processing
- Exponential operation circuits
