AD8224BCPZ-WP
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8224 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 750μA |
| Quiescent Current | 750μA |
| Supply Current-Max | 0.75mA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 175μV |
| -3db Bandwidth | 1.5MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 6e-7μA |
| Voltage Gain-Nom | 10 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
AD8224BCPZ-WP Overview
There is a 16-VQFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Instrumentation-type. Upon delivery, op amp ic is packaged in a Tray case. A total of 16 terminations have been reported in the past few weeks. Buffer amplifier has a total of 16 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. 16 pins are available on the instrumentation amplifier. There is an input offset voltage of 300μV for this buffer op amp. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. There should be no change in the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The total number of elements in this buffer amplifier is 2. Linear amplifier has a quiescent current of 750μA. Instrumentation amplifier resistance should stay within the range of 10 TΩ.
AD8224BCPZ-WP Features
16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
AD8224BCPZ-WP Applications
There are a lot of Analog Devices Inc. AD8224BCPZ-WP Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Power control
- Computer workstations
- Signal amplification
- High gain DC amplifier
- RF cable systems
- single/dual op amp sum and difference circuits
- Band-pass filter
- Large motor controllers
- Proportional counter tubes
