AD8224HBCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8224 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 750μA |
| Quiescent Current | 750μA |
| Slew Rate | 2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 300μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 175μV |
| -3db Bandwidth | 1.5MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 6e-7μA |
| Voltage Gain-Nom | 10 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8224HBCPZ-WP Overview
In order to protect the op amps, a 16-VQFN, CSP case is used. There are two types of operational amplifiers in this circuit. A Tray case is used to deliver the buffer op amp. During the past two weeks, there have been close to 16 terminations. In this case, there are 16 pins on the board. Please take in mind that op amp should be run at 15V. The buffer op amp includes 16 pins. In terms of input offset voltage, operational amplifier rates 300μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 750μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 60dB is the best course of action. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. Buffer amplifier has a quiescent current of 750μA. It is important that the linear amplifier resistance stays within the range of 10 TΩ.
AD8224HBCPZ-WP Features
16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
AD8224HBCPZ-WP Applications
There are a lot of Analog Devices Inc. AD8224HBCPZ-WP Instrumentational OP Amps applications.
- Power control
- Radar
- Active probe
- Logarithmic operation circuits
- Proportional counter tubes
- Navigation
- Inverse/same-phase proportional circuit
- Band-pass filter
- pH (acidity)
- Ultrasound transducers
