AD8226ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 800MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8226 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 400μA |
| Nominal Supply Current | 325μA |
| Max Supply Current | 350μA |
| Slew Rate | 0.6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.35V~18V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.027μA |
| Voltage - Input Offset | 100μV |
| -3db Bandwidth | 1.5MHz |
| Voltage Gain-Nom | 5 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8226ARZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Instrumentation-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2μV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 400μA. 60dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. Instrumentation amplifier resistance should remain within the range of 800MOhm.
AD8226ARZ Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 800MOhm
AD8226ARZ Applications
There are a lot of Analog Devices Inc. AD8226ARZ Instrumentational OP Amps applications.
- Power control
- Television
- Cinema or auditorium audio system
- High input resistance broadband
- Power generator
- Tablets
- ECG equipment
- Medical imaging
- Active probe
- Hand-held batteries
