AD8226BRMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 800MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8226 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 400μA |
| Nominal Supply Current | 400μA |
| Slew Rate | 0.6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.35V~18V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 160 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Voltage - Input Offset | 50μV |
| -3db Bandwidth | 1.5MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8226BRMZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a Instrumentation-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 400μA, this op amp ic can operate. Maintain 60dB as the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is a rating of 1 for the operating supply voltage of the buffer op amp. The op amp resistance should stay within the range of 800MOhm.
AD8226BRMZ-R7 Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 800MOhm
AD8226BRMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8226BRMZ-R7 Instrumentational OP Amps applications.
- Thermocouples
- Laptop
- Industrial control system
- Power control
- Digital cameras
- Polarized electrodes
- Signal transformation
- Vehicle electronics
- High speed sample
- Signal operation
