banner_page

AD822BR-REEL7

2 Channels 20mA per Channel 2pA 80 dB Instrumentational OP Amps 5V~30V ±2.5V~15V AD822 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD822BR-REEL7
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 556
  • Description: 2 Channels 20mA per Channel 2pA 80 dB Instrumentational OP Amps 5V~30V ±2.5V~15V AD822 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Operating Supply Current 1.8mA
Quiescent Current 900μA
Slew Rate 3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 2pA
Voltage - Supply, Single/Dual (±) 5V~30V ±2.5V~15V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 1.5mV
Gain Bandwidth Product 1.9MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 1900 kHz
Voltage Gain 120dB
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 300μV
Settling Time 4.5 μs
Low-Bias YES
Micropower YES
Input Capacitance 2.8pF
Input Voltage Noise Density 25nV/sqrt Hz
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD822
Pin Count 8
Output Type Rail-to-Rail
Number of Channels 2

AD822BR-REEL7 Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. This op amp can operate from a supply current at 1.8mA. Keeping the voltage gain at 120dB is the best course of action. 2 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 900μA quiescent current running through op amp ic.

AD822BR-REEL7 Features


8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail

AD822BR-REEL7 Applications


There are a lot of Analog Devices Inc. AD822BR-REEL7 Instrumentational OP Amps applications.

  • Displayers for aircraft and air transportation control systems
  • Mobile phone
  • Semiconductor detectors
  • Video amplifiers
  • pH (acidity)
  • Computer workstations
  • Portable electronic products powered by batteries
  • Automotive sensors
  • Inverse/same-phase proportional circuit
  • High input resistance broadband

Write a review

Note: HTML is not translated!
    Bad           Good