AD8231ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8231 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Slew Rate | 1.1V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~2.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 700 kHz |
| Gain Bandwidth Product | 7MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 4μV |
| -3db Bandwidth | 1MHz |
| Input Offset Current-Max (IIO) | 0.0005μA |
| Non-linearity-Max | 0.005% |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8231ACPZ-RL Overview
Packaging for the buffer amplifier is in the form of a 16-WQFN Exposed Pad, CSP case. This is a Instrumentation type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 16 terminations have been reported in the past few weeks. Buffer amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. The op amp ic has an array of 16 pins on it. Regarding input offset voltage, buffer amplifier rates 15μV voltage. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 5mA , this buffer op amp will be able to operate. On this instrumentation amplifier, there are 2 circuits that are connected together. As far as the device is concerned, buffer amplifier has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is important that the linear amplifier resistance stays within the range of 10GOhm.
AD8231ACPZ-RL Features
16 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10GOhm
AD8231ACPZ-RL Applications
There are a lot of Analog Devices Inc. AD8231ACPZ-RL Instrumentational OP Amps applications.
- Navigation
- Strain gauges
- Non-polarized electrodes
- Tablets
- Signal filtering
- Signal operation
- Medical imaging
- Fission chambers
- Thermocouples
- earphone
