AD8231WACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8231 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Slew Rate | 1.1V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~2.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 700 kHz |
| Gain Bandwidth Product | 7MHz |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 4μV |
| -3db Bandwidth | 1MHz |
| Input Offset Current-Max (IIO) | 0.0005μA |
| Non-linearity-Max | 0.005% |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8231WACPZ-RL Overview
In order to protect the op amps, a 16-WQFN Exposed Pad, CSP case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are 16 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 15μV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 5mA. The buffer amp consists of 2 circuits in total. As far as the device is concerned, buffer amplifier has 1 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Automotive is the number that corresponds to the series of the buffer op amp. It is important that the op amp resistance stays within the range of 10GOhm.
AD8231WACPZ-RL Features
16 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10GOhm
AD8231WACPZ-RL Applications
There are a lot of Analog Devices Inc. AD8231WACPZ-RL Instrumentational OP Amps applications.
- Video amplifiers
- Strain gauges
- Television
- Subtraction operation circuits
- Biopotential
- Tablets
- Automation control systems
- Inverse/same-phase proportional circuit
- Instrumentation
- Broadcasting
