AD8237ARMZ
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | AD8237 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 115μA |
| Nominal Supply Current | 115μA |
| Max Supply Current | 115μA |
| Slew Rate | 0.15V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 200 kHz |
| Gain Bandwidth Product | 6MHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 25μV |
| -3db Bandwidth | 0.2MHz |
| Voltage Gain-Nom | 10 |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
AD8237ARMZ Description
The AD8237ARMZ is a rail-to-rail input and output instrumentation amplifier with micropower and zero drift. Any gain from 1 to 1000 is set by the relative match of two resistors. With two ratio-matched resistors, the AD8237 provides exceptional gain accuracy that can be maintained at any gain.
To provide real rail-to-rail capability, the AD8237ARMZ uses an indirect current feedback architecture. The AD8237ARMZ, unlike traditional in-amps, can fully amplify signals with common-mode voltage at or slightly over its supply. This allows high common-mode voltage applications to use a smaller power supply and conserve energy. For portable systems, the AD8237ARMZ is a suitable choice. The AD8237ARMZ makes full use of a restricted power budget, offering bandwidth and drift performance ideal for bench-top systems, with a minimum supply voltage of 1.8 V, a typical supply current of 115 A, and a wide input range.
AD8237ARMZ Features
RFI filter on-chip
8 kV HBM ESD rating
8-lead MSOP package
Gain set with 2 external resistors
Can achieve low gain drift at all gains
Ideal for battery-powered instruments
Supply current: 115 μA
Rail-to-rail input and output
Zero input crossover distortion
Single-supply operation: 1.8 V to 5.5 V
Designed for excellent dc performance
Minimum CMRR: 106 dB
Maximum gain error: 0.005% (all gains)
Maximum offset voltage drift: 0.3 μV/°C
Maximum gain drift: 0.5 ppm/°C (all gains)
Input bias current: 1 nA guaranteed to 125°C
Bandwidth mode pin (BW) to adjust compensation
AD8237ARMZ Applications
Portable systems
Bridge amplification
Current measurement
Pressure measurement
Medical instrumentation
Thermocouple interface
