AD823AR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD823 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Power Dissipation | 900mW |
| Quiescent Current | 6.3mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 17mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 16MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00003μA |
| Dual Supply Voltage | 3V |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD823AR Description
The AD823AR is a dual precision, 16 MHz, JFET input op amp that may be powered by two 1.5 V to 18 V supplies or a single 3.0 V to 36 V supply. In single-supply mode, the input voltage range of this device extends below ground, demonstrating its real single-supply capability. For IOUT 100 A, the output voltage swing is within 50 mV of each rail, resulting in an exceptional output dynamic range. With source impedances up to a Gigaohm, dc precision is provided by an offset voltage with a maximum of 800 V, an offset voltage drift of 2 V/°C, input bias currents under 25 pA, and low input voltage noise. It offers a low supply current of 2.6 mA per amplifier, 16 MHz, 3 dB bandwidth, 108 dB THD @ 20 kHz, and a 22 V/s slew rate. The AD823 operates as a follower and can drive direct capacitive loads up to 500 pF while delivering an output current of 15 mA and 0.5 V from the supply rails. The amplifier can now handle a variety of load situations thanks to this.
AD823AR Features
Single-supply operation
Output swings rail-to-rail
Input voltage range extends below ground
Single-supply capability from 3 V to 36 V
High load drive
Capacitive load drive of 500 pF, G = +1
The output current of 15 mA, 0.5 V from supplies
Excellent ac performance on 2.6 mA/amplifier
Slew rate of 22 V/μs
?3 dB bandwidth of 16 MHz, G = +1
350 ns settling time to 0.01% (2 V step)
Good dc performance
2 μV/°C offset voltage drift
25 pA maximum input bias current
800 μV maximum input offset voltage
Low noise: 16 nV/√Hz @ 10 kHz
No phase inversion with inputs to the supply rails
Low distortion: ?108 dBc worst harmonic @ 20 kHz
AD823AR Applications
Active filters
Photodiode preamps
Medical instrumentation
12-bit to 16-bit data acquisition systems
Battery-powered precision instrumentation
