AD823ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD823 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 900mW |
| Quiescent Current | 6.3mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 17mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 16MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00003μA |
| Dual Supply Voltage | 9V |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD823ARZ Description
The AD823 is a 16 MHz dual precision JFET input op-amp that may be powered by a single 3.0 V to 36 V supply or two 1.5 V to 18 V supplies. In single-supply mode, it features a real single-supply input voltage range that extends below ground. For IOUT 100 A, the output voltage swing is within 50 mV of each rail, resulting in a wide output dynamic range.
With source impedances up to a Gigaohm, dc precision is provided by an offset voltage of 800V maximum, an offset voltage drift of 2V/°C, input bias currents below 25 pA, and low input voltage noise. With a low supply current of 2.6 mA per amplifier, it provides 16 MHz, 3 dB bandwidth, 108 dB THD @ 20 kHz, and a 22 V/s slew rate. As a follower, the AD823 drives up to 500 pF of direct capacitive load and generates a 15 mA output current at 0.5 V from the supply rails. This enables the amplifier to cope with a variety of load circumstances.
AD823ARZ Features
?Single-supply operation
?High load drive
?Excellent ac performance on 2.6 mA/amplifier
?Good dc performance
?Low distortion: ?108 dBc worst harmonic @ 20 kHz
?Low noise: 16 nV/√Hz @ 10 kHz
?No phase inversion with inputs to the supply rails
AD823ARZ Applications
?Battery-powered precision instrumentation
?Photodiode preamps
?Active filters
?12-bit to 16-bit data acquisition systems
?Medical instrumentation
