AD824ARZ-14-REEL
| Parameters | |
|---|---|
| Input Capacitance | 3.3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD824 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 2.7mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000035μA |
AD824ARZ-14-REEL Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called J-FET-types. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 2.5mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. On the buffer amps, there are 4 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 625μA.
AD824ARZ-14-REEL Features
14 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
AD824ARZ-14-REEL Applications
There are a lot of Analog Devices Inc. AD824ARZ-14-REEL Instrumentational OP Amps applications.
- Blood pressure sensors
- Instrumentation
- Wireless base stations
- Proportional operation circuits
- Non-polarized electrodes
- Active probe
- Medical imaging
- Biopotential
- Tablets
- Large motor controllers
