AD824ARZ-14-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 2.7mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000035μA |
| Input Capacitance | 3.3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD824ARZ-14-REEL7 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the J-FET type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. The total number of pins on linear amplifier is 14. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 14 pins. There is an input offset voltage of 2.5mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2.5mA, this op amp ic can operate. The voltage gain should stay at 120dB. Instrumentation amplifier has 4 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Currently, linear amplifier is operating with a quiescent current of 625μA.
AD824ARZ-14-REEL7 Features
14 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
AD824ARZ-14-REEL7 Applications
There are a lot of Analog Devices Inc. AD824ARZ-14-REEL7 Instrumentational OP Amps applications.
- Switching amplifier
- Exponential operation circuits
- Commercial audio systems
- High gain DC amplifier
- Cinema or auditorium audio system
- Subtraction operation circuits
- Portable media players
- Weak signal detection
- Large motor controllers
- Hand-held batteries
