AD8250ARMZ
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8250 |
| Pin Count | 10 |
| Output Type | Push-Pull |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 4.5mA |
| Slew Rate | 25V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 98 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 20dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Voltage - Input Offset | 70μV |
| -3db Bandwidth | 10MHz |
| Dual Supply Voltage | 9V |
| Max Junction Temperature (Tj) | 140°C |
| Voltage Gain-Nom | 2 |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | iCMOS® |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
AD8250ARMZ Overview
The linear amplifier is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a Instrumentation-type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations is approaching the 10 mark. The total number of pins on linear amplifier is 10. This linear amplifier should be powered by an 15V battery. 10 pins are available on the instrumentation amplifier. The input offset voltage is 200μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 4.5mA, this op amp ic can operate. Voltage gain should remain at 20dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Push-Pull signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 3. iCMOS? corresponds to linear amplifier's series.
AD8250ARMZ Features
10 Pins
supply voltage of 15V
20dB voltage gain
Output Type: Push-Pull
AD8250ARMZ Applications
There are a lot of Analog Devices Inc. AD8250ARMZ Instrumentational OP Amps applications.
- Micro signal measurement
- Differentiator circuits
- Test and measurement instruments
- Signal amplification
- Blood pressure sensors
- Communication
- Communication device
- Ultrasound transducers
- PDA
- pH (acidity)
