AD8253ARMZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | iCMOS® |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20kOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8253 |
| Pin Count | 10 |
| Operating Supply Voltage | 15V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.3mA |
| Nominal Supply Current | 4.6mA |
| Slew Rate | 20V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| -3db Bandwidth | 10MHz |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
AD8253ARMZ Overview
Op amp is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. A Instrumentation-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. There are a total of 10 pins on this op amp. This linear amplifier should be powered by an 15V battery. The buffer op amp includes 10 pins. The input offset voltage is 150μV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 5.3mA . The voltage gain should stay at 60dB. This op amp ic has 1 circuits. The operating supply voltage of instrumentation amplifier is rated 15V voltage. iCMOS? corresponds to linear amplifier's series. Instrumentation amplifier resistance should remain within the range of 20kOhm. As you can see, the linear amplifier has 3 amplifiers.
AD8253ARMZ Features
10 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 20kOhm
AD8253ARMZ Applications
There are a lot of Analog Devices Inc. AD8253ARMZ Instrumentational OP Amps applications.
- Power generator
- Subtraction operation circuits
- Comparator
- Strain gauges
- Ultrasound transducers
- Radiation thermometry transducers
- Cinema or auditorium audio system
- Band-stop filter
- Signal amplification
- High speed sample
