AD825AR-16-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD825 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Quiescent Current | 7.2mA |
| Slew Rate | 140V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 41000 kHz |
| Gain Bandwidth Product | 26MHz |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| -3db Bandwidth | 46MHz |
| Input Capacitance | 6pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD825AR-16-REEL Overview
Packaged in a 16-SOIC (0.295, 7.50mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called J-FET-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 16. The pins on this board total to 16 in total. 16 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Operational amplifier can operate supply current at 6.5mA. It is recommended to keep the voltage gain at 66dB at all times. The op amp ic has 1 channels on it. Linear amplifier has a quiescent current of 7.2mA. In order to sort the op amp's consumer IC type, VIDEO AMPLIFIER can be used.
AD825AR-16-REEL Features
16 Pins
66dB voltage gain
AD825AR-16-REEL Applications
There are a lot of Analog Devices Inc. AD825AR-16-REEL Instrumentational OP Amps applications.
- Television broadcasting equipment
- Power control
- Portable docking station
- Information processing
- Weighing systems
- Medical instruments
- E-book readers
- Vehicle electronics
- Home audio systems
- Multimedia playback equipment
