AD825AR-16-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD825 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Quiescent Current | 7.2mA |
| Slew Rate | 140V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 26000 kHz |
| Gain Bandwidth Product | 26MHz |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| -3db Bandwidth | 46MHz |
| Input Capacitance | 6pF |
| Consumer IC Type | VIDEO AMPLIFIER |
| Harmonic Distortion | 77% |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD825AR-16-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 16-SOIC (0.295, 7.50mm Width) case. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 16. The total number of pins on linear amplifier is 16. Linear amplifier includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 6.5mA and 10 . There should be no change in the voltage gain at 66dB. On the buffer amps, there are 1 channels that can be used. The current is quiescent at 7.2mA. In order to sort customer IC types, use VIDEO AMPLIFIER.
AD825AR-16-REEL7 Features
16 Pins
66dB voltage gain
AD825AR-16-REEL7 Applications
There are a lot of Analog Devices Inc. AD825AR-16-REEL7 Instrumentational OP Amps applications.
- Instrumentation
- Hand-held batteries
- Commercial audio systems
- Digital cameras
- Laptop
- Wireless base stations
- Addition operation circuits
- High speed sample
- Strain gauges
- Division circuits
