AD825ARZ-16-REEL
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 26MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 66dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 88dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 180 ns |
| -3db Bandwidth | 46MHz |
| Input Capacitance | 6pF |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD825 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 7.2mA |
| Quiescent Current | 7.2mA |
| Slew Rate | 140V/μs |
| Amplifier Type | J-FET |
AD825ARZ-16-REEL Overview
A 16-SOIC (0.295, 7.50mm Width) case is used to package the op amp. A J-FET-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 16 terminations. There are a total of 16 pins on this op amp. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 7.2mA. You should keep the voltage gain at 66dB for the time being. Buffer op amp is equipped with 1 channels on the device. 7.2mA quiescent currents are flowing through buffer op amp.
AD825ARZ-16-REEL Features
16 Pins
supply voltage of 5V
66dB voltage gain
AD825ARZ-16-REEL Applications
There are a lot of Analog Devices Inc. AD825ARZ-16-REEL Instrumentational OP Amps applications.
- Communication device
- Exponential operation circuits
- Automation control systems
- Scintillation detectors
- Commercial audio systems
- Signal amplification
- Test equipment
- Band-stop filter
- RF cable systems
- Wireless base stations
