AD825ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD825 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 7.2mA |
| Quiescent Current | 7.2mA |
| Slew Rate | 140V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 41MHz |
| Gain Bandwidth Product | 26MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 66dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 88dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 180 ns |
| -3db Bandwidth | 46MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 6pF |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD825ARZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a J-FET type op amp. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 7.2mA and 10 . Keeping the voltage gain at 66dB is the best course of action. On the buffer amps, there are 1 channels that can be used. There is a quiescent current of 7.2mA in this operational amplifier circuit.
AD825ARZ Features
8 Pins
supply voltage of 5V
66dB voltage gain
AD825ARZ Applications
There are a lot of Analog Devices Inc. AD825ARZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Weighing systems
- Home audio systems
- ECG equipment
- pH (acidity)
- High/low-pass filter circuit
- Wireless base stations
- Test equipment
- Oscilloscopes
- single/dual op amp sum and difference circuits
