AD825ARZ-REEL7
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD825 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 7.2mA |
| Quiescent Current | 7.2mA |
| Slew Rate | 140V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 26MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 21000 kHz |
| Voltage Gain | 66dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 88dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 180 ns |
| -3db Bandwidth | 46MHz |
| Input Capacitance | 6pF |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
AD825ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called J-FET-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 7.2mA . 66dB should be the voltage gain. There are a total of 1 channels available on the op amps. As a result, linear amplifier's quiescent current is 7.2mA.
AD825ARZ-REEL7 Features
8 Pins
supply voltage of 5V
66dB voltage gain
AD825ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD825ARZ-REEL7 Instrumentational OP Amps applications.
- Broadcasting
- Addition operation circuits
- Signal operation
- Ultrasound transducers
- Polarized electrodes
- Mobile phone
- MP3
- Power generator
- Scintillation detectors
- Television
