AD826ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD826 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 350V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 72.04dB |
| Average Bias Current-Max (IIB) | 6.6μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 70 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 2.34mm |
| Length | 5.01mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD826ARZ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Op amp ic rates 2mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . A supply current of 15mA can be used to operate this linear amplifier. Maintain 72.04dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 28V voltage. The quiescent current is 7.5mA.
AD826ARZ Features
8 Pins
supply voltage of 5V
72.04dB voltage gain
AD826ARZ Applications
There are a lot of Analog Devices Inc. AD826ARZ Instrumentational OP Amps applications.
- Power control
- Logarithmic operation circuits
- Signal amplification
- Video conversion and routing
- Instrumentation
- Active probe
- Computer workstations
- E-book readers
- Communication
- Vehicle electronics
