Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
10kOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Instrumentation Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8271 |
Pin Count |
10 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
18V |
Number of Channels |
1 |
Operating Supply Current |
2.6mA |
Nominal Supply Current |
2.3mA |
Max Supply Current |
3.2mA |
Min Input Voltage |
2.5V |
Slew Rate |
30V/μs |
Amplifier Type |
Programmable Gain |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
500nA |
Max Input Voltage |
18V |
Voltage - Supply, Single/Dual (±) |
5V~36V ±2.5V~18V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
600μV |
Bandwidth |
15MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
0.5μA |
Power Supply Rejection Ratio (PSRR) |
113.98dB |
Voltage - Input Offset |
300μV |
Settling Time |
700 ns |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8271ARMZ Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. A Programmable Gain-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 10h termination of the year. A total of 10 pins are located on this board. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. An 10-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 600μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 2.6mA . Op amp ic has 1 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Op amp resistance should stay within the range of 10kOhm.
AD8271ARMZ Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10kOhm
AD8271ARMZ Applications
There are a lot of Analog Devices Inc. AD8271ARMZ Instrumentational OP Amps applications.
- Fission chambers
- Biopotential
- Commercial audio systems
- Proportional operation circuits
- Logarithmic operation circuits
- Information processing
- Vehicle electronics
- High gain DC amplifier
- Gaming industry
- Television broadcasting equipment