AD8271BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8271 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.3mA |
| Max Supply Current | 3.2mA |
| Min Input Voltage | 2.5V |
| Slew Rate | 30V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 113.98dB |
| Voltage - Input Offset | 300μV |
| Settling Time | 700 ns |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8271BRMZ Overview
In the package, you will find a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 10 terminations this year. A total of 10 pins are located on this board. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 10 pins are available on the instrumentation amplifier. Op amp rates 600μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 2.6mA . 1 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V. Instrumentation amplifier resistance should remain within the range of 10kOhm.
AD8271BRMZ Features
10 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 10kOhm
AD8271BRMZ Applications
There are a lot of Analog Devices Inc. AD8271BRMZ Instrumentational OP Amps applications.
- Oscilloscopes
- Displayers for aircraft and air transportation control systems
- Power control
- Exponential operation circuits
- Micro signal measurement
- Industrial control system
- Television
- Inverse/same-phase proportional circuit
- Wireless base stations
- Portable media players
