AD8275ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 108kOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8275 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.9mA |
| Number of Bits | 16 |
| Slew Rate | 25V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 86 dB |
| Voltage - Supply, Single/Dual (±) | 3.3V~15V |
| Output Current per Channel | 30mA |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 15MHz |
| Voltage Gain | 13.98dB |
| Voltage - Input Offset | 300μV |
| Settling Time | 350 ns |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Input Bias Current | 10pA |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8275ARMZ-R7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a Differential-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.9mA and 10 . Voltage gain should remain at 13.98dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Op amp resistance should stay within the range of 108kOhm. The 16-bit linear amplifier is suitable for many applications and is popular among hobbyists and technicians alike.
AD8275ARMZ-R7 Features
8 Pins
supply voltage of 5V
13.98dB voltage gain
Output Type: Rail-to-Rail
Resistance of 108kOhm
AD8275ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8275ARMZ-R7 Instrumentational OP Amps applications.
- Fission chambers
- Radiation thermometry transducers
- Broadcasting
- Automotive sensors
- Digital cameras
- Polarized electrodes
- Video amplifiers
- Large motor controllers
- Band-pass filter
- Proportional operation circuits
