Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Lead, Tin |
Mounting Type |
Through Hole |
Package / Case |
8-CDIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn63Pb37) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.3W |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
15V |
Base Part Number |
AD827 |
Pin Count |
8 |
Number of Channels |
2 |
Operating Supply Current |
13.5mA |
Power Dissipation |
1.3W |
Quiescent Current |
5.25mA |
Supply Current-Max |
17mA |
Slew Rate |
300V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
95 dB |
Current - Input Bias |
3.3μA |
Voltage - Supply, Single/Dual (±) |
±4.5V~18V |
Output Current per Channel |
32mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
50MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
50000 kHz |
Voltage Gain |
70.88dB |
Average Bias Current-Max (IIB) |
9.5μA |
Power Supply Rejection Ratio (PSRR) |
72dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
300μV |
Settling Time |
120 ns |
Bias Current-Max (IIB) @25C |
7μA |
Dual Supply Voltage |
15V |
Input Capacitance |
1.5pF |
Input Voltage Noise Density |
15nV/sqrt Hz |
Height |
3.56mm |
Length |
10.29mm |
Width |
7.87mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD827AQ Overview
Packaged in a 8-CDIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 13.5mA. 70.88dB should remain the voltage gain. Instrumentation amplifier has 2 channels on it. The quiescent current is 5.25mA.
AD827AQ Features
8 Pins
supply voltage of 15V
70.88dB voltage gain
AD827AQ Applications
There are a lot of Analog Devices Inc. AD827AQ Instrumentational OP Amps applications.
- Gaming industry
- Computer workstations
- Test equipment
- Radar
- Portable media players
- Automation control systems
- Integrator circuits
- Band-stop filter
- Laptop
- Subtraction operation circuits