AD827SQ
| Parameters | |
|---|---|
| Output Current | 20mA |
| Quiescent Current | 5.25mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 9.5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 7μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 7.87mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD827 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 13.5mA |
| Power Dissipation | 1.3W |
AD827SQ Overview
A 8-CDIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2mV voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, op amp ranges -55°C~125°C. Using an 13.5mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 70.88dB at all times. As far as the device is concerned, buffer amplifier has 2 channels. There is an 5.25mA quiescent current running through op amp ic.
AD827SQ Features
8 Pins
supply voltage of 15V
70.88dB voltage gain
AD827SQ Applications
There are a lot of Analog Devices Inc. AD827SQ Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- ECG equipment
- High/low-pass filter circuit
- Broadcasting
- High gain DC amplifier
- Video conversion and routing
- PDA
- Division circuits
- Gaming industry
- Comparator
