AD8305ACPZ-RL7
| Parameters | |
|---|---|
| Slew Rate | 15 V/μs |
| Input Offset Voltage (Vos) | 20mV |
| Bandwidth | 15MHz |
| Supply Current-Max (Isup) | 6.5mA |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 1.5V |
| Input Bias Current | 400nA |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Logarithmic Converter |
| Resistance | 35MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Fiber Optics |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 500mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8305 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 5.4mA |
| Power Dissipation | 500mW |
| Quiescent Current | 5.4mA |
AD8305ACPZ-RL7 Overview
In a package with a Tape & Reel (TR) number.It is a very good value for money Logarithmic Converter.I have sent it along with the 16-VFQFN Exposed Pad, CSP package.There is a mounting of the part in the Surface Mount direction.Fiber Optics is the most common place where it is used.Device AD8305 is its base part number.The 1 functions here are used for amplification purposes due to their high performance.This terminal consists of a total of four terminals, each with its own function.When proceeding peak relow for the part, the iron temperature should be controlled under 260.The part has a total of four 16 pins in total.For a fully functioning amplifier, it would be recommended that the supply voltage be set at 5V.I would like to present you with a 16-pin amplifier for your custom needs.The device can operate as low as -40°C, meaning that the device can function at the lowest temperature possible.An impressive feature of this part is its capability to operate in temperatures as high as 85°C.In order to enhance design flexibility, Surface Mount has been incorporated into this product.There is a great deal of amplifying power in it, just like any other high-quality Other Analog ICs.Voltage 12V is the maximum supply voltage for this device.Power supply must be at least 3V volts.5V can be used as a supply for this device.A 5V power supply is needed to power the part.The 35MOhm resistance of this amplifier is specified.Set the supply current to 5.4mA to keep the amplifier working normally.Amplification can be provided by 3 basic elements.
AD8305ACPZ-RL7 Features
AD8305ACPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD8305ACPZ-RL7 Special Purpose Amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Fast A/D and D/A converters, video amplifiers
- Comparator
- High gain DC amplifier
- Television broadcasting equipment
- Cinema or auditorium audio system
- Test equipment
- Weak signal detection
- Digital cameras
- Band-pass filter
