AD8307ARZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Logarithmic Amplifier |
| Resistance | 1.1kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Receiver Signal Strength Indication (RSSI) |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8307 |
| Pin Count | 8 |
| Number of Elements | 6 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 50mW |
| Quiescent Current | 8mA |
| Response Time | 400 ns |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 500MHz |
| Voltage Gain | 85.8dB |
| -3db Bandwidth | 500MHz |
| Input Bias Current | 25μA |
| Positive Input Voltage-Max | 4V |
| Negative Input Voltage-Max | -0.3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8307ARZ-RL7 Overview
These devices are packaged in an integrated Tape & Reel (TR)-package.As far as value for money goes, this is an excellent Logarithmic Amplifier that has a great deal to offer.This item was sent with the 8-SOIC (0.154, 3.90mm Width) package.This requires mounting the part in the Surface Mount direction, which involves mounting the part.Receiver Signal Strength Indication (RSSI) is the most common place where it is used.Here's the AD8307 part number.There are 1 functions here which are used for accessing high performance for amplification purposes.8 terminals are present in total, each of which has its own purpose.Under 260, you should control the iron temperature when conducting peak relow for the part.In total, there are 8 pins of the part.For a fully functioning amplifier, it would be recommended that the supply voltage be set at 5V.You can use this amplifier for custom work.Using the device at -40°C is the lowest temperature possible.Interestingly, this part can run at temperatures up to 85°C.This product has been enhanced with Surface Mount to enhance its design flexibility.The amplifying capacity of this Analog Computational Functions is marvellous and it is just like any other high-quality Analog Computational Functions.5.5V is the maximum supply voltage rated for it.A power of at least 2.7V is supplied.With this video processor, you are able to achieve amazing performance as it combines 1 channels.It has a very good voltage gain of 85.8dB.Power supplies that are compatible with 5V power supplies are required for this part.1.1kOhm resistance is specified for this amplifier.It is recommended that the amplifier's supply current be set to 8mA to keep it functioning normally.There is no performance degradation at -3db bandwidth.Amplification is achieved through the use of 6 basic elements.
AD8307ARZ-RL7 Features
AD8307ARZ-RL7 Applications
There are a lot of Analog Devices Inc. AD8307ARZ-RL7 Special Purpose Amplifiers applications.
- Mobile phone
- single/dual op amp sum and difference circuits
- Large motor controllers
- Signal operation
- Medical instruments
- Measurements of Wheatstone bridge
- Fission chambers
- Signal amplification
- E-book readers
- Automatic control
