AD8332ARU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 402.988471mg |
| Packaging | Tube |
| Series | X-AMP® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Variable Gain Amplifier |
| Resistance | 6kOhm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Signal Processing |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8332 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 58mA |
| Power Dissipation | 960mW |
| Slew Rate | 650 V/μs |
| Input Offset Voltage (Vos) | 50mV |
| Gain Bandwidth Product | 120MHz |
| Voltage Gain | 19dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Gain | 55 dB |
| -3db Bandwidth | 120MHz |
| Noise Figure | 4.2 dB |
| Length | 9.7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8332ARU Overview
In a Tube package, it is housed.It is an excellent Variable Gain Amplifier that is very good value for the money you are paying for it.It's in the 28-TSSOP (0.173, 4.40mm Width) package.Mounted in Surface Mount is the part.Signal Processing is its main application.This device's base part number is AD8332, which can be found on the device's packaging.It is used here to access high performance for amplification purposes by using the 1 functions.28 terminals are in total there, which each have their own function that they perform.There is a need of controlling the iron temperature under 240 when proceeding with peak relow for the part.As a result, there are a total of 28 pins on the part.28-pin amplifier for custom applications.This device is capable of operating at temperatures as low as -40°C.There is an impressive capability for this part to operate at temperatures as high as 85°C.In order to enhance this product's design flexibility, Surface Mount is embedded.The maximum supply voltage that it is rated for is 5.5V.Provided at least with 4.5V power, if not more.With this video processor, you are able to achieve amazing performance as it combines 2 channels.With 5V, you can supply this device.Voltage gain of 19dB is excellent on this amplifier.An amplifier with 6kOhm resistance is specified.It is recommended that the supply current be set to 58mA in order to keep the amplifier working normally.The -3db bandwidth performance of this device is 120MHz.The official X-AMP? series website has more information about the series.
AD8332ARU Features
AD8332ARU Applications
There are a lot of Analog Devices Inc. AD8332ARU Special Purpose Amplifiers applications.
- Fast A/D and D/A converters, video amplifiers
- Power transmission
- Scintillation detectors
- High-frequency data acquisition systems
- Home and commercial audio systems
- Semiconductor detectors
- single/dual op amp sum and difference circuits
- Switching amplifier
- Band-stop filter
- Industrial control system
