AD8352ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 210mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8352 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Operating Supply Current | 37mA |
| Nominal Supply Current | 37mA |
| Power Dissipation | 210mW |
| Min Input Voltage | 3V |
| Slew Rate | 8000V/μs |
| Amplifier Type | RF/IF Differential |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 75nA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Input Offset Voltage (Vos) | -60mV |
| Bandwidth | 2.5 GHz |
| Gain Bandwidth Product | 2.5 GHz |
| Gain | 25 dB |
| Settling Time | 2 ns |
| -3db Bandwidth | 2.2GHz |
| Consumer IC Type | CONSUMER CIRCUIT |
| Noise Figure | 15.5 dB |
| Nominal Supply Voltage (DC) | 5.5V |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 2.75mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8352ACPZ-R7 Overview
It is packaged in an 16-VFQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp ic of the RF/IF Differential type. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 16 terminations. Buffer amplifier has a total of 16 pins on it. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates -60mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 37mA. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 5.5V voltage. Op amp resistance should stay within the range of 3kOhm. In order to sort customer IC types, use CONSUMER CIRCUIT.
AD8352ACPZ-R7 Features
16 Pins
Output Type: Differential
Resistance of 3kOhm
AD8352ACPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8352ACPZ-R7 Instrumentational OP Amps applications.
- Proportional counter tubes
- Inverse/same-phase proportional circuit
- High gain DC amplifier
- Video computer boards
- MP3
- High speed sample
- Ultrasound transducers
- Computer workstations
- Signal amplification
- Blood pressure sensors
